Epoxy.com Epoxy Bonding Systems
Epoxy and Polyurethane Adhesives
Uses Include Bonding and Waterproofing Systems
Almost all Epoxy.com epoxy resins can be used as an epoxy bonding and adhesive systems.
However, the thicker epoxies (epoxy gels) typically make the better adhesives,
because they are easier to use when Appling a thick layer. Below is
a list of medium to very thick epoxies. These epoxies are designed with
the primary function of bonding various materials to other materials. Epoxy.com
Gel Adhesives Systems are called by a number of different terms throughout the
industry, including but not limited to: Epoxy Bonder, Epoxy Adhesive
Systems,
Epoxy Gel Adhesive Systems, Epoxy Bonding Systems, Epoxy Gel Patching Adhesive,
etc. Epoxy.com Gel Adhesive Systems are zero (0) VOC. Having no VOCs means that
Epoxy.com Epoxy Gel products meet even the strictest Low VOC
requirements.
For thinner adhesives please see Epoxy.com Injection and Structural Adhesives
.
- Epoxy.com Product #5 Fast Set Gel
Adhesive is a 100% solids high-mod epoxy gel adhesive
system used for
vertical and overhead bonding applications and structural repairs. It is also
used as a grout for anchor bolts, dowels and rebar. Zero
(0) VOC.
- Epoxy.com Product#6 Gel - Normal Setting
Adhesive is a high-mod epoxy gel adhesive
system used for vertical and
overhead bonding applications and structural repairs. It is also used as a grout
for anchor bolts, dowels and rebar. Zero (0) VOC.
- Epoxy.com Product #6SC Long Pot life
Adhesive produces a non-sagging material that is
ideal for repairs on vertical or overhead surfaces. PRODUCT #6SC
meets or exceeds the requirements of ASTM - C881-87, Types I, II,
and IV, Grade 3 Class "B" and "C". Zero (0) VOC.
- Epoxy.com Product #7 All Purpose Epoxy
Bonding Agent is a two component, 100% solids epoxy resin system
designed to bond new concrete to old and other materials to
concrete. It has a convenient 1:1 mix ratio, by volume with a viscosity similar
to heavyweight oil. It exceeds the requirements of ASTM C-881-90, Types I, II,
IV and V, Grade 2, Class "B" and "C".
Zero (0) VOC.
- Epoxy.com Product #7SC is
a 100% solids high-mod epoxy adhesive used to bond fresh concrete to cured
concrete, steel to fresh or hardened concrete, as a grout for anchor bolts,
dowels and rebar, as a binder for epoxy concrete, and for bonding other
dissimilar materials. It is similar to Epoxy.com Product #7 but with a slower
cure to allow more time for concrete pours. Zero (0)
VOC.
- Epoxy.com Product #17 Decorative Stone Overlay Adhesive Resin - a two component, 100% solids high-mod epoxy adhesive used for bonding stone and other aggregates in all types of flooring applications. Some uses would include patios, pool decks, walkways and other areas where a long wearing and decorative system is desired.
Zero (0) VOC Epoxy.
- Epoxy.com Product #18 General Purpose Epoxy - a hard set epoxy compound formulated for general use.
Epoxy.com Product #18 cures at room temperature and is a low viscosity system. This durable, resilient material requires no post curing to achieve permanent bond strength. Mixing ratio of 1 to 1 makes this product easy to use. Epoxy.com Product #18 General Purpose Epoxy solves many difficult bonding, and epoxy mortar problems. Product has the ability to bond to a variety of substrates including cannot dry and hard to dry surfaces. Zero
(0) VOC Epoxy.
- Epoxy.com Product #701 Flexible Bonder
is a two component, 100% solids, mixedat a 1:1 ratio adhesive formulated to give
a permanent bond to ceramic, metal, concrete and elastomeric surfaces. It is
thixotropic, non-sag, and is easily applied by trowel. Zero
(0) VOC Epoxy.
- Epoxy.com Product #702 Traffic Marker
and Anchor Bolt Adhesive is a two component, 1:1 ratio, 100%
solids, moisture insensitive epoxy resin system manufactured to bond delineators
and traffic markers to median barriers, parapets, and roadways. It is a normal
setting adhesive for use in temperatures above 50° F. Epoxy.com Product #702 Traffic Marker and Anchor Bolt
Adhesive will bond to steel, concrete, and asphalt. It exceeds the
requirements of AASHTO M237 Type IV. Zero (0) VOC Epoxy.
- Epoxy.com Product #703 Flexible Gel
Adhesive is a non-sagging material that is ideal for repairs on
vertical or overhead surfaces. It exceeds the requirements of ASTM C 881-87,
Types I, II, and III Grade 3, Class "B", "C", "E" and "F".
Zero (0) VOC Epoxy.
- Epoxy.com Product #704 Emergency Epoxy
is a rapid setting, two component, 1:1 ratio epoxy adhesive. It sets in six
minutes and can be put into service in one hour regardless of temperature. It
was designed to bond metals, glass, concrete and wood in a matter of minutes.
Zero (0) VOC Epoxy.
- Epoxy.com Product #705 Two Component Flexible Adhesive
is a two component flexible adhesive, formulated to bond PVC and plastics to
various substrates. Epoxy.com Product #705 Two Component
Flexible Adhesive will adhere plastics to other plastics, concrete, steel,
wood and masonry. Epoxy.com Product #705 Two Component
Flexible Adhesive is thixotropic and is easily applied by serrated trowel.
Zero (0) VOC Epoxy.
- Epoxy.com Product #706 Heat Resistant
Bonder/Mortar is a 100% solids, moisture insensitive epoxy adhesive
and repair material. When A and B Components are mixed they produce a gel
consistency similar to petroleum jelly, which will not sag or run on a vertical
or overhead surface application. Zero (0) VOC Epoxy.
- Epoxy.com Product #707 Splash Zone &
Under Water Epoxy Paste is a moisture-insensitive, two-component,
100% solids epoxy-resin system. When Product
#707 Splash Zone & Under Water Epoxy is mixed at a 1:1 ratio, by volume,
this product produces a paste-like material that is ideal for protection or
restoration of concrete, steel and timber piles and other structural elements in
marine environments. Zero (0) VOC Epoxy.
- Epoxy.com Product #710 Superseded by Epoxy.com Product #225
- Epoxy.com Product #711 is
protective coating designed to provide cavitation, erosion and corrosion
resistance to metallic and non-metallic surfaces. Epoxy.com Product #711 acts as a barrier against
extremely harsh environmental factors such as low and high PH, temperatures
extremes, dry and fluid particulate flow and corrosive chemical attack.
Zero (0) VOC Epoxy.
- Epoxy.com Product #712 a two component flexible sealant, formulated to repair
leaking electrical equipment and circuit breakers. It bonds tenaciously to
ceramics, plastics, metals and most substrates. Zero
(0) VOC Epoxy.
- Epoxy.com Product #713 Dowel Bar and
Anchor Bolt Adhesive is a two component, thixotropic, fast
setting epoxy adhesive. It is specifically formulated with an easy to use,
nonsag consistency. The special high function resin system allows cure in
temperatures as low as 20 F. The non-sagging properties will permit the material
to be pumped or gunned into horizontal holes for anchoring rebar or steel bolts.
Epoxy.com Product #713 Dowel Bar and Anchor
Bolt Adhesive exceeds the requirements of ASTM C 881-90 Types, I, II, Grade
3, Class A. Zero (0) VOC Epoxy.
- Epoxy.com Product #714 Precast
Segmental Adhesive is a 100% solids, gelled epoxy adhesive
formulated to the requirements of ASTM C-881-90, Type VI, Grade 3, Class D, E,
or F. AASHTO M-235-90 duplicates the technical requirements of ASTM -C-881-90.
Zero (0) VOC Epoxy.
- Epoxy.com Product #720 Cove Base
Binder - can be used to install an integral cove base for most
Epoxy.com Flooring Systems, to provide seamless wall to floor protection.
Zero (0) VOC Epoxy.
Other Epoxy and Resinous Products That May Interest You
|
|
Proper mixing and installation is critical to the optimal success
of all product. See
Installation Tips,
Techdata, &
MSDS for more details on our products.
Be sure to contact us with any questions and/or concerns that you
have.
For more information please contact:
Epoxy.com
A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Over
350 products,
Since 1980
Florida & Vermont
USA
Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12Noon-1PM Eastern Time for Lunch
321-206-1833 Customer Service - Ordering and Order Status
Katey Fontaine, VP - Customer Service Director
sales@epoxy.com
Technical Support
352-533-2167 Norm Lambert, President - Technical Support Director
info@epoxy.com
352-489-1666 Accounting and Administration
Debby Lambert, CEO, and CFO
office@epoxy.com
352-489-1625 Fax line to all Departments
www.epoxy.com
24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253
| We accept MasterCard, Visa, American Express, Discover,
or Wire Transfers. |
Copyright © 1994-2012 EPOXY.COM
a division of Epoxy Systems, Inc. -
Florida and Vermont. All rights reserved.
Unless
other wise agreed upon in writing, buyer is responsible for the cost of
shipping.
This
information is presented in good faith to assist in determining whether this
product is suitable for application. No warranty or representation, however, is
intended or made, nor is protection from any law or patent to be inferred, and
all patent rights reserved.
Epoxy.com a
division of Epoxy Systems, Inc. warrants its products (when
properly stored) for the period of time as follows: Epoxies, Product
#315, Product #315BC, and Product #316 one (1) year; Polyesters,
Methyl Methacrylates (normal) two (2) months and Polyurethanes Four (4) months;
Power Tools and Equipment 90 days; Vinyl Esters, and all other
resins (not specifically mentioned above) 30 days; hand tools
(non-power tools) 30 days. Epoxy.com warrants that its
products will be free of manufacturing defects and will be in
conformity with published specifications when handled, stored, mixed
and applied in accordance with recommendations of Epoxy.com. If any
product fails to meet this warranty, the liability of Epoxy.com will
be limited to replacement of any non-conforming material if notice
of such non-conformity is given to Epoxy.com within the warranty
period for the material (as indicated above), or within 1 year of
the delivery of materials (whichever is sooner). Epoxy.com may in
its discretion refund the price received by Epoxy.com in lieu of
replacing the material. No customer, distributor, or representative
of Epoxy.com is authorized to change or modify the published
specifications of this warranty in any way. No one is authorized to
make oral warranties on behalf of Epoxy.com. In order to obtain
replacement or refund the customer must provide written notice
containing full details of the non-conformity. Epoxy.com reserves
the right to inspect the non-conforming material prior to
replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE
ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT
LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR
PURPOSE. Epoxy.com 'S OBLIGATION SHALL NOT EXTEND BEYOND THE
OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND Epoxy.com SHALL
HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD
PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER
DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All
quotes and sales subject to availability.
Many of our
products are made on an individual order basis. Unless
authorized in writing by Epoxy.com a division of Epoxy Systems, Inc.
in writing before the material is made, there are no returns on
items purchased from us, once the order has been processed, and the
material made. In the event of authorized returns a restocking
charge will be charged in the amount of 30% of the value of the
material returned or $150 whichever is greater. No returns on
non-list priced items. All Returns are for merchandise (store)
credit only, no cash or credit card credits. In the event of a
return, buyer is responsible for the cost of shipping and handling
in both directions.
[Tech Data Sheets in Acrobat Format]
[MSDS in Acrobat Format]
[Online Ordering Authorization Form]
[Add this page to Favorites]
5899560
|